Turtle Beach Stealth 600 Gen 2 Hard Reset (2024)

FAQs

How to reset Turtle Beach Stealth 600 without USB? ›

Part 1. Hard-Reset Your Headset

To hard-reset your Stealth 600 Gen 2 Xbox headset, please do the following: Hold down the Connect and Mode buttons for 30 seconds.

Disconnect the transmitter from the PC, and plug it into a different USB port on the console. Power on the headset. Wait 1 minute, and allow the headset and transmitter to re-pair after the recovery process. This may take some time.

Disconnect the Power Cable from your Xbox One, and wait 20 seconds. Reconnect the Power Cable to your Xbox One. Power On the Xbox One using the Power Button on the front of the Console. Re-pair the headset to the console, using the Connect Button on your Headset and the Enroll Button on your Xbox One Console.

Below that lower volume dial, there is a Mode button. Pressing this will allow you to cycle through the headset's four EQ Presets, which are detailed below: Signature Sound. Bass Boost.

A: The original Stealth 600 GEN 2 for Xbox and Xbox Series X|S uses Xbox Wireless to pair directly to the Xbox consoles without the need for any sort of transmitter or adapter.

Does the headset offer Bluetooth compatibility? No. The Stealth 600 Gen 2 PS would not provide any sort of Bluetooth compatibility. The headset is not capable of pairing to Bluetooth devices.

If your mini-transmitter cannot pair after 30 seconds, it will search for a previously paired headset, or any available Stealth 600 Gen 2 USB For PlayStation headset to pair to. Try bringing the headset closer to the mini-transmitter to ensure a successful/faster pairing.

Insert a paperclip (or something similar) into the pinhole on the transmitter to press the Pair Button, until the transmitter's Connection Status LED flashes rapidly. Note: the Pair Button on the Transmitter is recessed in a pinhole to prevent accidental operation.

Plug the mini transmitter and the headset itself into two free USB ports on the computer. The Audio Hub program will automatically detect that the headset/mini transmitter have been connected, and will search for any available updates. If there is an available update, you will be prompted to perform that update.

How do you fix an unresponsive Turtle Beach headset? ›

When your Turtle Beach headset doesn't respond to anything and shows a red light, you need to do a 'hard reset'. Press and hold the 'Connect' and 'Mode' buttons for 20 seconds. That way, you'll restore the factory settings on the headset. This solves most problems.

If Windows does not recognize the headset, try the following: - If you have many USB devices attached to your PC, try removing most of them, then reconnect the headset back into the USB port. - Try connecting to different USB ports on your PC/laptop. - Disconnect the Headset, restart your PC, then plug it back in.

Move the Mode switch on the side of the transmitter to USB, and then connect both the transmitter and the headset to separate USB ports on the computer. You will see the window shown below; to adjust the Mic Monitoring volume, move the slider below "Mic Monitor" to your preferred level, and it will save automatically.

In order to conserve battery life, your headset will power off after no audio is played through it for 10 consecutive minutes. This is a fixed feature and cannot be adjusted.