Description
This bed comes with 4 oversized vertical cabinets with standard adjustable galvanized shelving, 2 horizontal cabinets with adjustable galvanized shelving, plus a bonus locking rear shovel compartment for tons of additional storage. All doors are gas shock equipped and locking paddle latches are standard. Our 2.5” bumper receiver allows you to add a hitch for bumper 18,500 lbs of rated pull capacity. Available cabinet drawers can add the finishing touch if you have a lot of parts or tools for your work load. Multiple lighting choices and cast housings are also available. These beds are a perfect complement for any single or dual wheel work truck with smooth 11 gauge sides and white or gloss black powder coating.
Photos & Videos
Standard Features
Steel Structural Frame
2.5" 18.5k Rated Bumper Receiver
4” Runner Channels (Adjustable on 56” CTA Only)
Formed 3 x 3/16” Channel Cross Members
Steel 1/8” Diamond Plate Floor
Angled Fuel Filler Neck & DEF Ready
Skirted Rear Bumper with Anti Slip Step
Receiver Hitch Ready
3 Tool Boxes w/ T-lock Latches, Adjustable Shelves on Each Side
Rear Lockable Compartment 27” x 38” - 78”
12 Ga Steel Construction
Mud Flap Brackets
3/4” LED Marker Lights
Premium Powder/Primer Black or White
Smooth Flare Fenders (Adjustable on Duallys)
2 Clear 6” Oval LED Reverse Lights
4 Red 6” Oval LED ST/TL/TN Lights
Single LED License Plate Light
Side & Rear Reflectors
All Lighting DOT Approved
Molded Sealed Harness w/ Resistors
4/5 & 7 Way Receiver Female Plug w/ ADAPTER
*Weight is approximate base model. Optional features will change
Attention: Due to supply chain issues some standard features are subject to change without notice. If a feature is of particular importance for you, please verify with your dealer prior to purchase.
Options
P02: (Includes 2 Item Listed Below)
Stainless Steel Fenders
Diamond Plate Trim
P03: (Includes 5 Items Listed Below)
Chrome Accent Light Package
Aluminum Cast Rear Light Housing
Aluminum Cast Rear License Plate Housing
Aluminum Diamond Plate Trim
Stainless Steel Fenders
P04: (Includes Item Listed Below)
Top Lid Tool Tray (Two per Side)
P05: (Includes 5 Items Listed Below)
Chrome Accent Light Package
Aluminum Cast Rear Light Housing
Aluminum Cast Rear License Plate Housing
Aluminum Diamond Plate Trim
Stainless Steel Fenders
Top Lid Tool Tray (Two per Side)
P06: (Includes 3 Items Listed Below)
Stainless Steel Fenders
Diamond Plate Trim
Top Lid Tool Tray (Two per Side)
3.5” Tube x 37.75” Head Rack
Extra Height Head Rack
B & W Turnover Ball 2-5/16"
C-TECH 6 Drawers Tool Cabinet
Black Powder Coat
Bed Size Guide
Use this guide when ordering your Norstar truck bed. Please observe the measurements of each dimension and check before placing your order.
Length: Measurement from cab to end of frame.
Width: Measurement from outside of tire to outside of tire
CTA: Measurement from cab to axle
Runner: Measurement from outside of frame to outside of frame at the rear of the frame.
Models: ST, SF, SR, SD
Order Method: Model x Length x Width x CTA x Runner
Example: ST 9’4”L x 97”W x 60”CTA x 34” Runners (Add options) Note: 11’ long beds will have 84” CTA
1998-Present
Dually – 8’6”L x 97”W x 56” CTA x 38” Runners
Single Wheel Long Wheel Base – 8’6”L x 84”W x 56”CTA x 38” Runner
Single Wheel Short Wheel Base – 84”L x 84”W x 40”CTA x 38” Runner
Cab & Chassis – 9’4”L x 94”/97''W x 60”CTA x 34” Runners
- F-450 & 550 are 94” & 97”W with Standard Headache Rack
2015 F650 Runners 34.5"
2001-Present
Dually – 8’6”L x 97”W x 56”CTA x 42” Runners
Single Wheel Long Wheel Base – 8’6”L x 84”W x 56”CTA x 42” Runner
Single Wheel Short Wheel Base – 84”L x 84”W x 42”CTA x 42” Runner
Cab & Chassis – 9’ 4”L x 90” or 92”W x 60”CTA x 34” Runners
(Prior to 2000 measurements will be required)
4500 & 5500 is 94”W with 60” Headache Rack
2003-Present
2007 Cab and Chassis – 9’4”L x 94”W x 60”CTA x 34” Runner
Mega Cab – 84”L x 97”W x 40” CTA x 42” Runners
Mega Cab – 84”L x 84”W x 38” CTA x 42” Runners
Dually – 8’6”L x 97”W x 58”CTA x 42” Runners
Single Wheel Long Wheel Base – 8’6”L x 84”W x 58”CTA x 42” Runner
Single Wheel Short Wheel Base – 84”L x 84”W x 38”CTA x 42” Runner
2002 and earlier will have 56” CTA and 38” Runners on long bed
Plug N Play
Installation Adapters
The standard wire harness plug on Norstar beds will fit most GM vehicle factory harnesses. We also offer a variety of plug n play adapters that will vehicles year models by the following manufacturers:
1001010 WIRE HARNESS ADAPTER DODGE, CAB CHASS (YEAR 2000-CURRENT)
1001009 WIRE HARNESS ADAPTER FORD, CAB CHASS (YEAR 2000-CURRENT)
1001011 WIRE HARNESS ADAPTER FORD, PICK-UP BOX DELETE CURRENT (YEAR 2011-CURRENT)
1001013 WIRE HARNESS ADAPTER FORD, PICK-UP BOX DELETE w/ STOP ADAPTOR (YEAR 2011-CURRENT)
1001012 WIRE HARNESS ADAPTER GM, ADAPTER (YEAR 2015)
1001014 WIRE HARNESS ADAPTER GM, PICK-UP BOX DELETE (YEAR 2010-2014)